Water humidity test chamber CON 300-FL, front loading

VLM Germany water condensing test rooms ensure the fulfillment of the most important international standards: DIN EN ISO 6270-2: 2005, ASTM D2247
They also allow alternative temperature (AT) and alternative temperature and humidity (AHT) . With the manual or electronic SO2 dosing system, the test rooms can perform the Kesternich (KES) test according to DIN EN ISO 6988 (DIN 50018).

Manufacturer:
VLM Germany
Price:
on request
Model:
CON 300-FL




Description
  • Cost-effective solution for water condensation and corrosion tests with SO2
  • VLM-patented technology allows the best possible reproducibility of the temperature conditions created in the test chamber, regardless of environmental conditions and geographic location
  • Microprocessor Jumo dTRON for all types of test rooms of 300 l, standard, other microprocessors (optional)
  • Time programming function
  • The CWC system is the VLM-patented technology that regulates the exact temperature gradient of ΔT = 1 ° C between the bottom and the roof of the  test chamber  – this is essential for an optimal condensation process in the test chamber at 100% RH regardless of the conditions Environment outside the test room
  • Flat heaters below the bottom of the room for uniform and rapid water heating in the gutter
  • Rotary speed controlled air blower for controllable specimen drying

Relevant test standards for condensed water tests:

DIN EN ISO 6270-2:2005, BS 3900 F2, BS 3900 F15, ASTM D2247

Note !!! Standards met according to the chosen model and accessories

Specifications

Available models:

CON 300-FL CH CWC

CON 300-FL AIR CWC KES

CON 300-FL AIR CWC

CON 300-FL ADO CWC

AWRF

COD: V.702.161.000
Water humidity test chamber with controlled condensed water and constant humidity
COD : V.702.361.001
Test chamber with condensed water, ambient air ventilation and kesternichcu test of SO2
COD: V.702.361.000
Test chamber with aeration with ambient air and controlled condensed water
COD: V.702.061.005
Test chamber with controlled condensed water and automatic door opening
COD: V.850.220.100
Automatic water refil in the test chamber
-Option for all types of test cameras

Capacity

ca. 300 L

Interior dimensions test chamber (W x D x H1/H2)

ca. 800 x 605 x 533/720 mm

Outer dimensions of the casing (overall) W x D x H

ca. 1100 x 700 x 900 mm

Required power supply

230V, 50/60Hz, 700W

Materials used

Test chamber is made of stainless steel, bottom coated with ECTFE, side walls made of Polyethylene with milled openings for supporting rods

Heating

Flat Micanite heater under the bottom of the chamber for fast and uniform heat transfer

Sensors

In basic type: 2x corrosion resistant and highly sensitive temperature sensors (floor and roof)

Temperature stability

±0,5°C

Aeration (type AIR)

Timer controlled built-in fan air flow ca. 16 m³/h

Timer (Jumo dTRON)

Two channel timer for automated switch over from heating to aeration mode

Weight

110 kg

Communication

RS 232 interface

Maximum operating temperature

50°C

Purity demineralized water | filling volume | fitting

< 5 μS/cm | ca. 3,5 L | ¾“ outer diameter
Option: Automatic water refill

Tap water (connection type)

Always via Ion-exchanging cartridge (¾“ outer diameter)

Compressed Air

6-8 bar (connection nipple size 5)

Waste water, drain

Pipe fittings (spiral hose ID 19 mm)

Exhaust pipe outer diameter

Pipe fitting (50 mm external diameter)

Number of supporting rods / max load

5 stainless steel rods coated with plastic / 30 kg each

Introduction of SO2

Self-closing inlet valve

Accessories
AWRF – Automatic water reunion
Option for all types of test chamber
Specimen racks:, inclination 15° (acc. to ISO6270-2) length 550mm
Article No.: V.852.250.001
Water purificator type 2800
Article No.: V.852.250.001
Water plant for supply of demineralised water
Article No.: V.852.250.002
Aplication

Auto industry

Paint industry

Metal Industry

Aerospace industry

Request