en
Cyclic Climate Tests CCT 1000-TL
The VLM Germany Corrosion Cycle Testing Rooms ensure the fulfillment of the most important international standards: DIN EN ISO 11997-1: 2006 Cycle B (previously VDA 621-415), VW PV 1210 (external climate module required), GMW 14872 (external climate module required)
It is also suitable for standard corrosion tests: Water Condensation test acc. DIN EN ISO 6270-2: 2005 (CH, AT, AHT), ASTM D2247, Salt Spray test acc. ISO 9227, IEC 60028-2-11 KA
Mob: 0742.072.255
Tel: 0251.417.665
E-mail: vanzari@cameretestare.ro
Warning: sprintf(): Too few arguments in /home4/r50890came/public_html/continut/themes/test-go/product-contents/single-products-content.php on line 286
- Compact design with frontal load, delivered as standard wiyh support table
- The steel construction allows a transient temperature and humidity time, which makes this test chamber perfectly suited for accelerated corrosion tests – they result in time and energy savings.
- VLM-patented technology enables the best possible reproducibility of climatic conditions created in the test room, regardless of environmental conditions and geographic location.
- The steel test chamber is more robust and less susceptible to damage compared to competitive glass-reinforced plastic products.
- The control system is easy to use and intuitive, based on a versatile color display controller in which the most common standard corrosion tests are preconfigured.
- Storage memory with the ability to retain up to 50 test programs with the most common pre-configured corrosion tests .
Relevant Standards for Cycle Test Corrosion Rooms:
Cyclical Corrosion Tests:
DIN EN ISO 11997-1:2006 Cycle B (previously VDA 621-415), VW PV 1210 (climate module required), GMW 14872 (climate module required)
Salt spraying tests:
– DIN EN ISO 9227, DIN 50942, DIN 53167, ASTM B 117-73, ASTM B 287-74, ASTM B 368-68, ISO 7253 ISO 3678, BS 1224, BS 2011, BS3900 F4, BS 3900 F12, BS 5466 Part I, BS 5466 Parts 2 + 3, NFX 41002, AS 21331 Section 3.1, SIS 184119, JIS Z 2371, IEC 60028-2-11 KA
Water condensation tests:
– ISO 6270-2, BS 3900F2, BS 3900 F15, ASTM D2242
Available Models:
CCT 1000-FL-I
Cod: V.735.065.150
CYClic Climate Tests
Capacity
ca. 1000 L
Inner test chamber dimensions W/D/H1/H2
ca. 1425 x 800 x 690 / 1005 mm
Outer dimensions of the casing (overall) W/D/H
ca. 1895 x 890 x 1265 mm
Required power supply
230 V, 50/60 Hz, 3000 W
Materials used
test chamber is made of stainless steel and coated with ECTFE (Halar®), additional side walls made of special Polyethylene with milled openings for supporting rods
Heating
Flat Micanite heaters under the bottom of the chamber and behind the side walls for fast and uniform heat transfer
Sensors
– corrosion resistant and highly sensitive temperature sensors above the floor and under the roof
Weight
230 kg
Communication
RS 232 interface (optional)
Cooling
Not available
Regulated humidity
Not available
Other specification
Purity demineralized water (connection type)
< 5 μS/cm (¾“ outer diameter)
Tap water (connection type)
Always via Ion-exchanging cartridge (¾“ outer diameter)
Compressed Air
6-8 bar (connection nipple size 5)
Waste water, drain
Pipe fittings (spiral hose ID 32 mm)
Exhaust pipe outer diameter
Pipe fitting (50 mm external diameter)
-Auto Industry
-Paint Industry
–Metal Industry
–Aerospace Industry
Relevant Standards for Cycle Test Corrosion Rooms:
Cyclical Corrosion Tests: DIN EN ISO 11997-1:2006 Cycle B (previously VDA 621-415), VW PV 1210 (climate module required), GMW 14872 (climate module required)
Salt spraying tests: – DIN EN ISO 9227, DIN 50942, DIN 53167, ASTM B 117-73, ASTM B 287-74, ASTM B 368-68, ISO 7253 ISO 3678, BS 1224, BS 2011, BS3900 F4, BS 3900 F12, BS 5466 Part I, BS 5466 Parts 2 + 3, NFX 41002, AS 21331 Section 3.1, SIS 184119, JIS Z 2371, IEC 60028-2-11 KA
Water condensation tests: – ISO 6270-2, BS 3900F2, BS 3900 F15, ASTM D2242