en
Corrosion Test Chamber SAL 1000 FL, front loading
VLM Germany corrosion testing rooms ensure the fulfillment of the most important international standards: DIN EN ISO 9227, IEC 60028-2-11 KA.
They also allow water condensation tests according to ISO 6270-2 (CH), but only with manual refill of the room with demineralized water.
Mob: 0742.072.255
Tel: 0251.417.665
E-mail: vanzari@cameretestare.ro
- Compact design with front loading, standard delivery with support cabinet
- Testing chamber with steel base, making it more robust and less susceptible to damage
- Easy-to-use control system with preconfigured test parameters
- Possible configuration and manual operation of the test chamber according to ISO 6270-2 water condensation test CH (high humidity)
- The basic version of the SAL 1000-FL test chamber is equipped with a microprocessor Jumo dTRON controller, easy to use.
- Salt Spray Testing System (SAL) according to ISO 9227
- Electronically controlled diaphragm pump with flow monitoring
- High performance nozzle with adjustable air cap from PEEK (polyether-ethyl ketone)
- Transparent Duran glass humidifier with easy-to-replace sintered PE filters for fine-grained compressed air distribution or full saturation with automatic humidity and automatic filling
- Manual drain cleaning to remove the salt mist in the test area before opening the lid;
Relevant test standards for salt spray tests:
– DIN EN ISO 9227, DIN 50942, DIN 53167, ASTM B 117-73, ASTM B 287-74, ASTM B 368-68, ISO 7253 ISO 3678, BS 1224, BS 2011, BS3900 F4, BS 3900 F12, BS 5466 Part I, BS 5466 Parts 2 + 3 NFX 41002, AS 21331 Section 3.1, SIS 1841190, JIS Z 2371, IEC 60028-2-1 KA
!!! Note: Standards are fulfileddepending on the selected model and accessories
Available models:
SAL 1000-FL
COD: V.715.062.020
Basic version, equipped with Jumo dTRON controller
SAL 1000-FL I ST
COD: V.715.262.320
Version with room cleaning and treatment specimen, equipped with Jumo IMAGO controller
Capacity
ca. 1000 L
Inner test chamber dimensions WxDxH1/H2
ca. 1400 x 800 x 800 / 1020 mm
Outer dimensions of the casing (overall) WxDxH
ca. 2160 x 1000 x 2070 mm
Required power supply
230 V, 50/60 Hz,3500 W
Materials used
The walls of the chamber are made of Polypropylene while the bottom is made of stainless steel and coated with ECTFE. The walls have milled openings for supporting rods
Heating
Flat Micanite heaters under the bottom of the chamber for fast and uniform heat transfer
Sensors
– 1x corrosion resistant and highly sensitive temperature sensor
Temperature stability
± 0,2°C
Aeration
NA
Programmable tests
yes
Weight
480 kg
Communication
RS 232 interface (optional)
Other specification
Purity demineralized water / filling volume / fitting
< 5 μS/cm / ca. 3,5 L / ¾“ outer diameter
Option: Automatic water refill
Tap water (connection type)
Always via Ion-exchanging cartridge (¾“ outer diameter)
Compressed Air
6-8 bar (connection nipple size 5)
Waste water, drain
Pipe fittings (spiral hose ID 32 mm)
Exhaust pipe outer diameter
Pipe fitting (75 mm external diameter)
Supporting rods / max load
7 stainless steel rods coated with plastic / 30 kg each
– CCL Clean the test chamber through a rotary nozzle by intermittend spraying of water (4 bars)after the salt test has finished
– ST Specimen treatment is required when the test procedure is configured to stop the corrosion test after the salt spray test has ended
– Automotive Industry
– Paint Industry
– Metal Industry
– Aerospace Industry
Salt Spray Test: DIN EN ISO 9227, DIN 50942, DIN 53167, ASTM B 117-73, ASTM B 287-74, ASTM B 368-68, ISO 7253 ISO 3678, BS 1224, BS 2011, BS3900 F4, BS 3900 F12, BS 5466 Part I, BS 5466 Parts 2 + 3 NFX 41002, AS 21331 Section 3.1, SIS 1841190, JIS Z 2371, IEC 60028-2-1 KA